Intrusion detection system (IDS)

-

An intrusion detection system (IDS)

  •  An intrusion detection system (IDS) is a system that monitors network traffic for suspicious activity and alerts when such activity is discovered. While anomaly detection and reporting are the primary functions, some intrusion detection systems are capable of taking actions when a malicious activity or anomalous traffic is detected, including blocking traffic sent from suspicious Internet Protocol (IP) addresses.
  • An IDS can be contrasted with an intrusion prevention system (IPS), which monitors network packets for potentially damaging network traffic, like an IDS, but has the primary goal of preventing threats once detected instead of primarily detecting and recording threats.


How do intrusion detection systems work?

  • Intrusion detection systems are used to detect anomalies to catch hackers before they do real damage to a network. They can be either network- or host-based. A host-based intrusion detection system is installed on the client computer, while a network-based intrusion detection system resides on the network.
  • Intrusion detection systems work by either looking for signatures of known attacks or deviations from normal activity. These deviations or anomalies are pushed up the stack and examined at the protocol and application layer. They can effectively detect events such as Christmas tree scans and domain name system (DNS) poisonings.
  • An IDS may be implemented as a software application running on customer hardware or as a network security appliance. Cloud-based intrusion detection systems are also available to protect data and systems in cloud deployments.



Different types of intrusion detection systems

IDSes come in different flavors and detect suspicious activities using different methods, including the following:

A network intrusion detection system (NIDS) is deployed at a strategic point or point within the network, where it can monitor inbound and outbound traffic to and from all the devices on the network.

A host intrusion detection system (HIDS) runs on all computers or devices in the network with direct access to both the internet and the enterprise's internal network. A HIDS has an advantage over a NIDS. It may be able to detect anomalous network packets originating from inside the organization or malicious traffic that a NIDS has failed to detect. A HIDS may also be able to identify malicious traffic that originates from the host itself, such as when the host has been infected with malware and is attempting to spread to other systems.

A signature-based intrusion detection system (SIDS) monitors all the packets traversing the network and compares them against a database of attack signatures or attributes of known malicious threats, much like antivirus software.

An anomaly-based intrusion detection system (AIDS) monitors network traffic and compares it against an established baseline to determine what is considered normal for the network concerning bandwidth, protocols, ports, and other devices. This type often uses machine learning to establish a baseline and accompanying security policy. It then alerts IT, teams, to suspicious activity and policy violations. By detecting threats using a broad model instead of specific signatures and attributes, the anomaly-based detection method improves upon the limitations of signature-based methods, especially in the detection of novel threats.

  • Historically, intrusion detection systems were categorized as passive or active. 
  • A passive IDS that detected malicious activity would generate an alert or log entries but would not take action; 
  • an active IDS sometimes called an intrusion detection and prevention system (IDPs), would generate alerts and log entries but could also be configured to take actions, like blocking IP addresses or shutting down access to restricted resources.


Example of IDS

Snort -- one of the most widely used intrusion detection systems -- is an open-source, freely available, and lightweight NIDS that is used to detect emerging threats. Snort can be compiled on most Unix or Linux operating systems (OSes), with a version available for Windows as well.


Capabilities of intrusion detection systems/Advantages of intrusion detection systems

Intrusion detection systems monitor network traffic to detect when an attack is being carried out by unauthorized entities. IDSes do this by providing some -- or all -- of these functions to security professionals:

  • monitoring the operation of routers, firewalls, key management servers, and files that are needed by other security controls aimed at detecting, preventing, or recovering from cyberattacks;
  • providing administrators a way to tune, organize and understand relevant OS audit trails and other logs that are otherwise difficult to track or parse;
  • providing a user-friendly interface so nonexpert staff members can assist with managing system security;
  • including an extensive attack signature database against which information from the system can be matched;
  • recognizing and reporting when the IDS detects that data files have been altered;
  • generating an alarm and notifying that security has been breached; and
  • reacting to intruders by blocking them or blocking the server.

Benefits of intrusion detection systems

  • Intrusion detection systems offer organizations several benefits, starting with the ability to identify security incidents. An IDS can be used to help analyze the quantity and types of attacks; organizations can use this information to change their security systems or implement more effective controls. An intrusion detection system can also help companies identify bugs or problems with their network device configurations. These metrics can then be used to assess future risks.
  • Intrusion detection systems can also help the enterprise attain regulatory compliance. An IDS gives companies greater visibility across their networks, making it easier to meet security regulations. Additionally, businesses can use their IDS logs as part of the documentation to show they are meeting certain compliance requirements.
  • Intrusion detection systems can also improve security responses. Since IDS sensors can detect network hosts and devices, they can also be used to inspect data within the network packets and identify the OSes of services being used. Using an IDS to collect this information can be much more efficient than manual censuses of connected systems.


Challenges of intrusion detection systems

  • IDSes are prone to false alarms -- or false positives. Consequently, organizations need to fine-tune their IDS products when they first install them. This includes properly configuring their intrusion detection systems to recognize what normal traffic on their network looks like compared to potentially malicious activity.
  • However, despite the inefficiencies they cause, false positives don't usually cause serious damage to the actual network and simply lead to configuration improvements. A much more serious IDS mistake is a false negative, which is when the IDS misses a threat and mistakes it for legitimate traffic. In a false negative scenario, IT teams have no indication that an attack is taking place and often don't discover until after the network has been affected in some way. An IDS should be oversensitive to abnormal behaviors and generate false positives than it is to be undersensitive, generating false negatives.
  • False negatives are becoming a bigger issue for IDSes -- especially SIDSes -- since malware is evolving and becoming more sophisticated. It's becoming harder to detect a suspected intrusion because new malware may not display the previously detected patterns of suspicious behavior that IDSes are typically designed to detect. As a result, there is an increasing need for IDSes to detect new behavior and proactively identify novel threats and their evasion techniques as soon as possible.


IDS versus IPS

  • An IPS are similar to an intrusion detection system but differs in that an IPS can be configured to block potential threats. As intrusion detection systems, IPSec can be used to monitor, log and report activities, but they can also be configured to stop threats without the involvement of a system administrator. An IDS simply warns of suspicious activity taking place, but it doesn't prevent it.
  • An IPS are typically located between a company's firewall and the rest of its network and may have the ability to stop any suspected traffic from getting to the rest of the network. Intrusion prevention systems execute responses to active attacks in real-time and can actively catch intruders that firewalls or antivirus software may miss.
  • However, organizations should be careful with IPSes because they can also be prone to false positives. An IPS false positive is likely to be more serious than an IDS false positive because the IPS prevents the legitimate traffic from getting through, whereas the IDS simply flags it as potentially malicious.
  • It has become a necessity for most organizations to have either an IDS or an IPS -- and usually both -- as part of their security information and event management (SIEM) framework. Several vendors integrate an IDS and an IPS together in one product -- known as unified threat management (UTM) -- enabling organizations to implement both simultaneously alongside firewalls and systems in their security infrastructure.

                         OR,

 


                                                     OR,




Comments

Post a Comment

Popular posts from this blog

Suppose that a data warehouse for Big-University consists of the following four dimensions: student, course, semester, and instructor, and two measures count and avg_grade. When at the lowest conceptual level (e.g., for a given student, course, semester, and instructor combination), the avg_grade measure stores the actual course grade of the student. At higher conceptual levels, avg_grade stores the average grade for the given combination. a) Draw a snowflake schema diagram for the data warehouse. b) Starting with the base cuboid [student, course, semester, instructor], what specific OLAP operations (e.g., roll-up from semester to year) should one perform in order to list the average grade of CS courses for each BigUniversity student. c) If each dimension has five levels (including all), such as “student < major < status < university < all”, how many cuboids will this cube contain (including the base and apex cuboids)?

-
Image
a) A Snowflake Shema is shown in figure below: b) The specific OLAP operations to be performed: 1. Roll-up on course from course_id to department. 2. Roll-up on a student from student_id to university. 3. Dice on course, student with department ="CS" and university = "biguniversity" 4. Drill-down on a student from the university to student_name. c) N = 4 dimensions The cube will contain 54 = 625 cuboids.
Read more

Suppose that a data warehouse consists of the four dimensions; date, spectator, location, and game, and the two measures, count and charge, where charge is the fee that a spectator pays when watching a game on a given date. Spectators may be students, adults, or seniors, with each category having its own charge rate. a) Draw a star schema diagram for the data b) Starting with the base cuboid [date; spectator; location; game], what specific OLAP operations should perform in order to list the total charge paid by student spectators at GM Place in 2004?

-
Image
  b) The specific OLAP operations to be performed are: 1. Roll-up on date from date id to year. 2. Roll-up on spectator from spectator id to status. 3. Roll-up on location from location id to location name. 4. Roll-up on the game from game id to all. 5. Dice with status= “students”, location name= “GM Place”, and year=2004
Read more

Discuss classification or taxonomy of virtualization at different levels.

-
Image
Taxonomy of virtualization Virtualization is mainly used to emulate the execution environment, storage, and networks. The execution environment is classified into two: – Process-level – implemented on top of an existing operating system.  – System-level – implemented directly on hardware and does not or minimum requirement of the existing operating system. OR,  Virtualization covers a wide range of emulation techniques that are applied to different areas of computing. A classification of these techniques helps us better understand their characteristics and use  V irtualization is mainly used to emulate  ● Execution Environments: To provide support for the execution of the programs eg. OS, and Application.  ○ Process Level: Implemented on top of an existing OS that has full control of the hardware  ○ System Level: Implemented directly on Hardware and do not require support from existing OS.  ● Storage: Storage vi...
Read more